Configuring an Open Mesh Controller 5.xx or 6.xx for the Smart WiFi Platform

Follow the format below to configure Open Mesh using firmware 5.xx or 6.xx

1. Configure SSID 1 of your network using the following settings:

   

   Splash Page URL – You will receive this from us
   RADIUS SERVER ADDRESS 1 – radius1.smartwifiplatform.com
   RADIUS SERVER ADDRESS 2 – radius2.smartwifiplatform.com
   Server Secret – You will receive from us
   NAS ID – You will receive from us
   Walled Garden – Available HERE

2. Click ‘Save Changes’
   

   Disclaimer on hardware configuration guides in the KB:

   This equipment has been integrated and tested in our labs with the Marketing4WiFi platform using the firmware versions below.

   CloudTrax Firmware 6.4.15

   LIMITED HARDWARE SUPPORT: Hardware manufacturers frequently make changes to firmware, controllers and GUI’s. The information below may be out of date or images may be different and is to be used as a general reference guide. We do offer additional limited support to help with trouble-shooting and we highly recommend that you have a hardware support agreement and/or access to a hardware support engineering representative from the manufacturer.